China AC Worm Gearbox for AC Gear Motor gearbox definition

Merchandise Description

1.Higher high quality die casting aluminum alloy housing,ideal for universal mounting.
two.Warmth sink layout for cooling supplies fantastic surface area and increased thermal ability than the
casting iron housings.
3.8 measurements from 030 to a hundred thirty,with energy scope from 7.5kw to 60kw.
4.More substantial pace ratio assortment.each and every solitary frame measurement has twelve ratios from 5:1 to a hundred:1.
5.Hardened worm with fantastic grinding has the characteristics of larger performance and large output torque.
6.Reduced noise and stably operating,can adapt lengthy time period operate situation in terrible environments.
7.Gentle bodyweight,high mechanical power.
eight.Modularization mixture PCRW&DRW prolong the ration of RW reducers from i=5:1 to 3200:1.
 

NMRW A B C C1 D(H7) E(h8) F G H H1 I L1 M N O
030 80 ninety seven 54 forty four fourteen fifty five 32 56 sixty five 29 55 sixty three 40 57 30
040 a hundred 121.five 70 60 18(19) sixty 43 seventy one seventy five 36.5 70 78 fifty 71.five forty
050 a hundred and twenty a hundred and forty four eighty 70 twenty five(24) 70 49 eighty five eighty five forty three.five 80 92 60 84 fifty
063 144 174 one hundred 85 twenty five(28) eighty sixty seven 103 ninety five fifty three 95 112 seventy two 102 63
075 172 205 a hundred and twenty ninety 28(35) 95 72 112 a hundred and fifteen 57 112.5 one hundred twenty 86 119 seventy five
090 206 238 a hundred and forty a hundred 35(38) a hundred and ten 74 130 a hundred thirty 67 129.5 one hundred forty 103 one hundred thirty five 90
a hundred and ten 255 295 170 115 forty two a hundred thirty a hundred and forty four one hundred forty four 74 one hundred sixty one hundred fifty five 127.5 167.5 110
a hundred thirty 293 335 two hundred 120 forty five a hundred and eighty 155 155 81 179 170 146.five 187.five one hundred thirty
one hundred fifty 340 four hundred 240 one hundred forty five 50 a hundred and eighty 185 185 96 210 two hundred 170 230 a hundred and fifty

 

NMRW P Q R S T V PE H t a kg
030 seventy five forty four six.5 21 5.five 27 M6X11(n=4) five sixteen.three one.2
040 87 55 six.5 26 6.five 35 M6X8(n=4) 6 twenty.8(21.8) 45° two.3
050 one hundred sixty four 8.5 thirty seven 40 M8X10(n=4) eight 28.3(27.3) 45° three.eight
063 a hundred and ten eighty eight.5 36 eight fifty M8X14(n=8) eight 28.3(31.3) 45° six.2
075 a hundred and forty ninety three 11 40 ten 60 M8X14(n=8) 8 31.1(38.3) 45° 9
090 a hundred and sixty 102 thirteen forty five 11 70 M10X18(n=8) ten 38.3(forty one.3) 45° 13
110 two hundred a hundred twenty five 14 50 fourteen 85 M10X18(n=8) 12 forty five.3 45° 42.five
a hundred thirty 250 a hundred and forty sixteen 60 fifteen one hundred M12X21(n=8) 14 forty eight.eight 45° fifty nine
a hundred and fifty 250 a hundred and eighty 18 72.5 18 a hundred and twenty M12X21(n=8) 14 53.8 45° 87

2.Creation Circulation

3.Organization Details
 In recent 10 a long time, CZPT has been dedicated to the manufacture of the motor items and the principal goods can be classified into the pursuing sequence, namely DC motor, DC gear motor, AC motor, AC equipment motor, Stepper motor, Stepper gear motor, Servo motor and Linear actuator sequence. 

Our motor items are extensively utilized in the fields of aerospace market, automotive business, financial equipment, house equipment, industrial automation and robotics, medical products, office equipment, packing equipment and transmission business, giving consumers trustworthy customized options for driving and controlling.

four.Our Companies
1). Standard Support:

Quick Reply All enquiry or email be replied in twelve hours, no delay for your enterprise.
Skilled Staff Concerns about merchandise will be replied skillfully, precisely, very best suggestions to you.
Limited Direct time Sample or modest get despatched in 7-15 times, bulk or custom-made buy about 30 times.
Payment Option T/T, Western Union,, L/C, etc, straightforward for your organization.
Just before cargo Take pictures, send out to clients for confirmation. Only confirmed, can be shipped out.
Language Option Aside from English, you can use your own language by electronic mail, then we can translate it.

two). Customization Service:
Motor specification(no-load velocity , voltage, torque , diameter, sounds, life, screening) and shaft size can be tailor-manufactured according to customer’s specifications.

five.Bundle & Shipping

 

US $44-88
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Low Speed
Number of Stator: Single-Phase
Function: Driving
Casing Protection: Open Type
Number of Poles: 4

###

Samples:
US$ 66/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NMRW A B C C1 D(H7) E(h8) F G H H1 I L1 M N O
030 80 97 54 44 14 55 32 56 65 29 55 63 40 57 30
040 100 121.5 70 60 18(19) 60 43 71 75 36.5 70 78 50 71.5 40
050 120 144 80 70 25(24) 70 49 85 85 43.5 80 92 60 84 50
063 144 174 100 85 25(28) 80 67 103 95 53 95 112 72 102 63
075 172 205 120 90 28(35) 95 72 112 115 57 112.5 120 86 119 75
090 206 238 140 100 35(38) 110 74 130 130 67 129.5 140 103 135 90
110 255 295 170 115 42 130 144 144 74 160 155 127.5 167.5 110
130 293 335 200 120 45 180 155 155 81 179 170 146.5 187.5 130
150 340 400 240 145 50 180 185 185 96 210 200 170 230 150

###

NMRW P Q R S T V PE H t a kg
030 75 44 6.5 21 5.5 27 M6X11(n=4) 5 16.3 1.2
040 87 55 6.5 26 6.5 35 M6X8(n=4) 6 20.8(21.8) 45° 2.3
050 100 64 8.5 30 7 40 M8X10(n=4) 8 28.3(27.3) 45° 3.8
063 110 80 8.5 36 8 50 M8X14(n=8) 8 28.3(31.3) 45° 6.2
075 140 93 11 40 10 60 M8X14(n=8) 8 31.1(38.3) 45° 9
090 160 102 13 45 11 70 M10X18(n=8) 10 38.3(41.3) 45° 13
110 200 125 14 50 14 85 M10X18(n=8) 12 45.3 45° 42.5
130 250 140 16 60 15 100 M12X21(n=8) 14 48.8 45° 59
150 250 180 18 72.5 18 120 M12X21(n=8) 14 53.8 45° 87

###

Quick Reply All enquiry or email be replied in 12 hours, no delay for your business.
Professional Team Questions about products will be replied professionally, exactly, best advice to you.
Short Lead time Sample or small order sent in 7-15 days, bulk or customized order about 30 days.
Payment Choice T/T, Western Union,, L/C, etc, easy for your business.
Before shipment Take photos, send to customers for confirmation. Only confirmed, can be shipped out.
Language Choice Besides English, you can use your own language by email, then we can translate it.
US $44-88
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Low Speed
Number of Stator: Single-Phase
Function: Driving
Casing Protection: Open Type
Number of Poles: 4

###

Samples:
US$ 66/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

NMRW A B C C1 D(H7) E(h8) F G H H1 I L1 M N O
030 80 97 54 44 14 55 32 56 65 29 55 63 40 57 30
040 100 121.5 70 60 18(19) 60 43 71 75 36.5 70 78 50 71.5 40
050 120 144 80 70 25(24) 70 49 85 85 43.5 80 92 60 84 50
063 144 174 100 85 25(28) 80 67 103 95 53 95 112 72 102 63
075 172 205 120 90 28(35) 95 72 112 115 57 112.5 120 86 119 75
090 206 238 140 100 35(38) 110 74 130 130 67 129.5 140 103 135 90
110 255 295 170 115 42 130 144 144 74 160 155 127.5 167.5 110
130 293 335 200 120 45 180 155 155 81 179 170 146.5 187.5 130
150 340 400 240 145 50 180 185 185 96 210 200 170 230 150

###

NMRW P Q R S T V PE H t a kg
030 75 44 6.5 21 5.5 27 M6X11(n=4) 5 16.3 1.2
040 87 55 6.5 26 6.5 35 M6X8(n=4) 6 20.8(21.8) 45° 2.3
050 100 64 8.5 30 7 40 M8X10(n=4) 8 28.3(27.3) 45° 3.8
063 110 80 8.5 36 8 50 M8X14(n=8) 8 28.3(31.3) 45° 6.2
075 140 93 11 40 10 60 M8X14(n=8) 8 31.1(38.3) 45° 9
090 160 102 13 45 11 70 M10X18(n=8) 10 38.3(41.3) 45° 13
110 200 125 14 50 14 85 M10X18(n=8) 12 45.3 45° 42.5
130 250 140 16 60 15 100 M12X21(n=8) 14 48.8 45° 59
150 250 180 18 72.5 18 120 M12X21(n=8) 14 53.8 45° 87

###

Quick Reply All enquiry or email be replied in 12 hours, no delay for your business.
Professional Team Questions about products will be replied professionally, exactly, best advice to you.
Short Lead time Sample or small order sent in 7-15 days, bulk or customized order about 30 days.
Payment Choice T/T, Western Union,, L/C, etc, easy for your business.
Before shipment Take photos, send to customers for confirmation. Only confirmed, can be shipped out.
Language Choice Besides English, you can use your own language by email, then we can translate it.

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China AC Worm Gearbox for AC Gear Motor     gearbox definition		China AC Worm Gearbox for AC Gear Motor     gearbox definition
editor by czh 2023-01-06

gear boxes

As one of leading gear boxes manufacturers, suppliers and exporters of products, We offer gear boxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear boxes

Recent Posts