China Professional Swivel Drive Gear Motor and Reduction Gearbox Crane gearbox definition

Product Description

The straight worm structure is adopted, and the gear part of slewing bearing is quenched by isothermal and high frequency, the tooth part has high hardness and good wear resistance.The contact area between the turbine and the worm is large, the operation is stable, the transmission torque is large, the transmission efficiency is high.

Description
There are no special limitations of mounting angles and positions of this series of products.  It can be mounted horizontally, vertically and inclined.  Enclosed slewing drives are assembled of enclosed housing, slewing bearing, worm shaft and other parts.  Users can choose electric motors or hydraulic motors as the driving power.  It can slew 360 degrees clock-wise or otherwise.  The slewing drive is compact and it is also easy to mount and maintain in comparison with other types of driving devises.
 
Features
It adopts enclosed design and the protection level can reach IP65.  It can effectively prevent dust, rain and other hostile environments.  It suits field usage such as desert, alpine and other hostile environments.
1.Products are easy to mount and maintain.
2.The design and mounting dimensions are international or domestic universal dimensions.  It is easy for the users’ replacements in the future.
 
Applications
1.This series of products are widely applied in the turning parts in construction machinery and solar power industries.
2.The azimuth and elevation drivers of solar tracking systems
3.The rotations of turntables or cranes in various types of construction machinery
4.The rotating parts of industrial equipments such as welding positioners

Tilting Moment Torque: Torque is the load multiplied by distance between the position of load and the center of slewing bearing. If the qorque generated by load and distance is greater than the rated tilting moment torque, slewing drive will be overturned.

Radial load: Load vertical to the axis of slewing bearing

Axial load: Load parallel to the axis of slewing bearing

Holding torque:It is the reverse torque.When the drive is rotating reversely, and parts are not damaged,The maximum torque achieved is called holding torque.

Self-locking: Only when loaded, the slewing drive is not able to reverse rotate and thus called self-locking.

Coresun Drive Slewing Bearing Production Testing



Coresun Drive testing reports for WH products

CONTACT US

It is sincerely looking CHINAMFG to cooperating with you for and providing you the best quality product & service with all of our heart!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Holding Torque: 43kn.M
Tilting Moment Torque: 54.3kn.M
IP Class: IP65
Static Axial Load: 475kn
Static Radial Laod: 190kn
Slewing Bearing: Worm Gear
Customization:
Available

|

Customized Request

gearbox

Steps to Replace a Faulty Gearbox in an Automobile

Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:

  1. Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
  2. Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
  3. Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
  4. Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
  5. Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
  6. Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
  7. Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
  8. Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
  9. Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
  10. Lower Engine: Carefully lower the engine back into its original position if it was suspended.
  11. Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
  12. Final Check: Double-check all connections and ensure that all components are properly secured.
  13. Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
  14. Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.

It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.

China Professional Swivel Drive Gear Motor and Reduction Gearbox Crane   gearbox definition		China Professional Swivel Drive Gear Motor and Reduction Gearbox Crane   gearbox definition
editor by CX 2024-04-09

gear boxes

As one of leading gear boxes manufacturers, suppliers and exporters of products, We offer gear boxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear boxes

Recent Posts