China supplier AC Worm Gearbox for AC Gear Motor supplier

Item Description

1.Higher top quality die casting aluminum alloy housing,ideal for universal mounting.
2.Heat sink style for cooling offers wonderful surface area region and larger thermal ability than the
casting iron housings.
three.8 dimensions from 030 to one hundred thirty,with electricity scope from 7.5kw to 60kw.
4.Bigger velocity ratio assortment.every single single body dimension has 12 ratios from 5:1 to 100:1.
five.Hardened worm with fine grinding has the features of increased effectiveness and massive output torque.
six.Low sound and stably running,can adapt long term work issue in horrible environments.
7.Light-weight bodyweight,high mechanical power.
8.Modularization mix PCRW&DRW increase the ration of RW reducers from i=5:1 to 3200:1.

NMRW A B C C1 D(H7) E(h8) F G H H1 I L1 M N O
030 80 97 fifty four forty four 14 fifty five 32 fifty six sixty five 29 55 sixty three forty 57 thirty
040 a hundred 121.5 70 60 18(19) 60 forty three 71 75 36.five 70 seventy eight fifty seventy one.five forty
050 one hundred twenty one hundred forty four 80 70 25(24) 70 49 eighty five 85 forty three.5 80 92 sixty eighty four 50
063 a hundred and forty four 174 a hundred eighty five 25(28) eighty sixty seven 103 ninety five fifty three ninety five 112 72 102 63
075 172 205 120 ninety 28(35) ninety five seventy two 112 a hundred and fifteen 57 112.five a hundred and twenty 86 119 seventy five
090 206 238 one hundred forty one hundred 35(38) one hundred ten 74 one hundred thirty 130 sixty seven 129.five 140 103 one hundred thirty five 90
a hundred and ten 255 295 a hundred and seventy one hundred fifteen 42 130 one hundred forty four a hundred and forty four 74 160 155 127.5 167.5 110
a hundred thirty 293 335 200 120 45 180 one hundred fifty five one hundred fifty five eighty one 179 one hundred seventy 146.five 187.five one hundred thirty
150 340 400 240 one hundred forty five 50 180 185 185 96 210 two hundred one hundred seventy 230 one hundred fifty


NMRW P Q R S T V PE H t a kg
030 75 44 six.5 21 five.five 27 M6X11(n=4) 5 sixteen.3 1.two
040 87 55 six.five 26 6.5 35 M6X8(n=4) 6 20.8(21.8) 45° two.3
050 a hundred sixty four eight.five 30 seven forty M8X10(n=4) 8 28.3(27.3) 45° three.8
063 one hundred ten eighty eight.5 36 eight fifty M8X14(n=8) eight 28.3(31.3) 45° six.two
075 140 93 11 40 10 sixty M8X14(n=8) eight 31.1(38.3) 45° 9
090 one hundred sixty 102 thirteen forty five 11 70 M10X18(n=8) 10 38.3(41.3) 45° thirteen
110 200 125 fourteen fifty 14 eighty five M10X18(n=8) twelve 45.3 45° forty two.5
a hundred thirty 250 a hundred and forty sixteen 60 fifteen one hundred M12X21(n=8) 14 forty eight.eight 45° 59
one hundred fifty 250 one hundred eighty eighteen 72.five 18 one hundred twenty M12X21(n=8) 14 53.8 45° 87

2.Manufacturing Movement

three.Company Info
 In recent 10 many years, CZPT has been focused to the manufacture of the motor products and the major products can be classified into the following collection, namely DC motor, DC equipment motor, AC motor, AC equipment motor, Stepper motor, Stepper equipment motor, Servo motor and Linear actuator series. 

Our motor items are extensively utilized in the fields of aerospace industry, automotive market, economic equipment, home equipment, industrial automation and robotics, medical products, place of work tools, packing machinery and transmission industry, giving buyers dependable personalized remedies for driving and controlling.

four.Our Solutions
1). Standard Support:

Swift Reply All enquiry or e mail be replied in 12 several hours, no hold off for your company.
Specialist Group Questions about merchandise will be replied skillfully, just, very best tips to you.
Short Lead time Sample or little order despatched in 7-fifteen days, bulk or tailored order about thirty times.
Payment Option T/T, Western Union,, L/C, etc, simple for your business.
Prior to cargo Take pictures, send out to clients for confirmation. Only verified, can be shipped out.
Language Choice Besides English, you can use your personal language by email, then we can translate it.

two). Customization Services:
Motor specification(no-load velocity , voltage, torque , diameter, noise, life, testing) and shaft duration can be tailor-manufactured in accordance to customer’s needs.

five.Package & Shipping


Application: Industrial
Speed: Low Speed
Number of Stator: Single-Phase
Function: Driving
Casing Protection: Open Type
Number of Poles: 4
US$ 66/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!


Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.


A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.


Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China supplier AC Worm Gearbox for AC Gear Motor   supplier China supplier AC Worm Gearbox for AC Gear Motor   supplier
editor by CX 2023-04-20

gear boxes

As one of leading gear boxes manufacturers, suppliers and exporters of products, We offer gear boxes and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear boxes

Recent Posts